manualshive.com logo in svg

HP 1650B, Руководство программиста, Страница: 36 / 346

Поделиться
Скачать
HP 1650B Скачать руководство пользователя страница 36

Addressing

By using the front-panel I/O and SELECT keys, the HP-IB interface can
be placed in either talk only mode (Printer connected to HP-IB) or
addressed talk/listen mode (Controller connected to HP-IB) (see 
Port Configuration” in chapter 

5 

of the 

 1651B Front-Panel

Reference 

manual). Talk only mode must be used when you want the

instrument to talk directly to a printer without the aid of a controller.
Addressed 

 mode is used when the instrument will operate in

conjunction with a controller. When the instrument is in the addressed
talk/listen mode, the following is true:

l

Each device on the HP-IB resides at a particular address ranging
from 0 to 30.

l

The active controller specifies which devices will talk, and which
will listen.

l

An instrument, therefore, may be talk addressed, listen addressed,

or unaddressed by the controller.

If the controller addresses the instrument to talk, it will remain configured
to talk until it receives an interface clear message (IFC), another

instrument’s talk address (OTA), its own listen address (MLA), or a
universal 

 (UNT) command.

If the controller addresses the instrument to listen, it will remain
configured to listen until it receives an interface clear message (IFC) its
own talk address (MTA), or a universal 

 (UNL) command.

Programming Over 

HP 

 1651B

2-2

Programming Reference

Содержание 1650B



























































































































































































































































































































































Отзывы:

Нет отзывов