manualshive.com logo in svg

HP 1650B, Руководство программиста, Страница: 172 / 346

Поделиться
Скачать
HP 1650B Скачать руководство пользователя страница 172

RANGe

RANGe

command/query

The RANGe command allows you to specify a range recognizer term in

the specified machine. Since a range can only be defined across one label
and, since a label must contain 32 or less bits, the value of the start pattern

or stop pattern will be between 

 

and 0.

Note 

Since a label can only be defmed across a maximum of two pods, a range
term is only available across a single label; therefore, the end points of the
range cannot be split between labels.

When these values are expressed in binary, they represent the bit values
for the label at one of the range recognizers’ end points. Don’t cares are
not allowed in the end point pattern specifications. Since only one range
recognizer exists, it is always used by the 

 state machine defined.

The 

 query returns the range recognizer end point specifications

for the range.

Note 

When two state analyzers are on, the RANGe term is not available in the

second state analyzer assigned and there are only 4 pattern recognizers

per analyzer.

 Subsystem

12-12

HP 

 16518

Programming Reference

Содержание 1650B



























































































































































































































































































































































Отзывы:

Нет отзывов