manualshive.com logo in svg

HP 1650B, Руководство программиста, Страница: 35 / 346

Поделиться
Скачать
HP 1650B Скачать руководство пользователя страница 35

Programming Over 

HP-IB

Introduction

This section describes the interface functions and some general concepts

of the HP-IB. In general, these functions are defined by IEEE 
(HP-IB bus standard). They deal with general bus management issues, as

well as messages which can be sent over the bus as bus commands.

interface

Capabilities

The interface capabilities of the HP 

 as defined by IEEE 488.1

are 

 

 

 TEO, L3, LEO, 

 

 

 

 

 CO, and E2.

Command and

The HP-IB has two modes of operation: command mode and data mode.

Data Concepts

The bus is in command mode when the ATN 

 is true. The command

mode is used to send talk and listen addresses and various bus commands,
such as a group execute trigger (GET). The bus is in the data mode when
the ATN 

 is false. The data mode is used to convey device-dependent

messages across the bus. These device-dependent messages include all of
the instrument commands and responses found in chapters 5 through 9 of
this manual and in the individual programming manuals for each module.

HP 

 

Programming Reference

Programming Over HP-IB

Содержание 1650B



























































































































































































































































































































































Отзывы:

Нет отзывов