61
To do…
Use the command...
Remarks
Enable retransmission
mpls rsvp-te timer retransmission
{
increment-value
[
increment-value
] |
retransmit-value
[
retrans-timer-value
] } *
Optional
Disabled by default
Enable summary refresh
mpls rsvp-te srefresh
Optional
Disabled by default
Configuring the RSVP hello extension
To configure the RSVP hello extension:
To do…
Use the command...
Remarks
Enter system view
system-view
––
Enter MPLS view
mpls
––
Enable global RSVP hello
extension
mpls rsvp-te hello
Required
Disabled by default
Configure the maximum number of
consecutive hellos that should be
lost before the link is considered
failed.
mpls rsvp-te hello-lost
times
Optional
By default, the link is considered
failed if three consecutive hellos
are lost.
Configure the hello interval
mpls rsvp-te timer hello
timevalue
Optional
The default is 3 seconds.
Exit to system view
quit
––
Enter interface view of MPLS TE link
interface
interface-type
interface-number
––
Enable interface RSVP hello
extension
mpls rsvp-te hello
Required
Disabled by default
NOTE:
RSVP hello extension detects the reachability of RSVP neighboring nodes. It is defined in RFC 3209.
Configuring RSVP-TE resource reservation confirmation
To configure RSVP-TE resource reservation confirmation:
To do…
Use the command...
Remarks
Enter system view
system-view
––
Enter MPLS view
mpls
––
Enable resource reservation
confirmation
mpls rsvp-te resvconfirm
Required
Disabled by default
