HP 100B SFF Скачать руководство пользователя

Страница: 28 / 104

Screws

The screws used in the computer are not interchangeable. They may have standard or metric threads

and may be of different lengths. If an incorrect screw is used during the reassembly process, it can

damage the unit. HP strongly recommends that all screws removed during disassembly be kept with the

part that was removed, then returned to their proper locations.

CAUTION:

Metric screws have a black finish. U.S. screws have a silver finish and are used on hard

drives only.

CAUTION:

As each subassembly is removed from the computer, it should be placed away from the

work area to prevent damage.

Cables and Connectors

Most cables used throughout the unit are flat, flexible cables. These cables must be handled with care

to avoid damage. Apply only the tension required to seat or unseat the cables during insertion or

removal from the connector. Handle cables by the connector whenever possible. In all cases, avoid

bending or twisting the cables, and ensure that the cables are routed in such a way that they cannot be

caught or snagged by parts being removed or replaced.

CAUTION:

When servicing this computer, ensure that cables are placed in their proper location

during the reassembly process. Improper cable placement can damage the computer.

Hard Drives

Handle hard drives as delicate, precision components, avoiding all physical shock and vibration. This

applies to failed drives as well as replacement spares.

●

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective

packaging and label the package ―Fragile: Handle With Care.‖

●

Do not remove hard drives from the shipping package for storage. Keep hard drives in their

protective packaging until they are actually mounted in the CPU.

●

Avoid dropping drives from any height onto any surface.

●

If you are inserting or removing a hard drive, turn off the computer. Do not remove a hard drive

while the computer is on or in standby mode.

●

Before handling a drive, ensure that you are discharged of static electricity. While handling a

drive, avoid touching the connector. For more information about preventing electrostatic damage,

refer to

Electrostatic Discharge Information on page 15

●

Do not use excessive force when inserting a drive.

●

Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic

fields such as monitors or speakers.

Содержание 100B SFF









































































































Результаты поиска

Содержание 100B SFF

Отзывы:

Похожие инструкции для 100B SFF

Бренды по названию

Популярные бренды

HP 100B SFF, Руководство по обслуживанию и ремонту

Результаты поиска

Содержание 100B SFF

Отзывы:

Похожие инструкции для 100B SFF

Бренды по названию

Популярные бренды