HP 100B SFF Скачать руководство пользователя страница 16

Страница: 16 / 104

Shortcut to Temporarily Override Boot Order

To boot

one time

from a device other than the default device specified in Boot Order, restart the

computer and press

Esc

(to access the boot menu) and then

(Boot Order), or only

(skipping

the boot menu) when the monitor light turns green. After POST is completed, a list of bootable

devices is displayed. Use the arrow keys to select the preferred bootable device and press

Enter

The computer then boots from the selected non-default device for this one time.

Computer Setup—Security

NOTE:

Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 2-4

Computer Setup

—Security

Option Description

Allows you to set and enable a setup (administrator) password.

NOTE:

If the setup password is set, it is required to change Computer Setup options, flash the

ROM, and make changes to certain plug and play settings under Windows.

NOTE:

This selection will only appear when at least one drive that supports the DriveLock feature

is attached to the system.

See the

Desktop Management Guide

for more information.

Allows you to set and enable a power-on password. The power-on password prompt appears after

a power cycle. If the user does not enter the correct power-on password, the unit will not boot.

NOTE:

This selection will only appear when at least one drive that supports the DriveLock feature

is attached to the system.

See the

Desktop Management Guide

for more information.

Allows you to set Device Available/Device Hidden (default is Device Available) for:

●

System audio

●

Network controller

NOTE:

You must disable AMT before trying to hide the network controller.

●

SATA0

●

SATA1

●

SATA2 (some models)

●

SATA3 (some models)

●

SATA4 (some models)

Setup Password

Power-On

Password

Device Security

Содержание 100B SFF









































































































Результаты поиска

Содержание 100B SFF

Отзывы:

Бренды по названию

Популярные бренды

HP 100B SFF, Руководство по обслуживанию и ремонту

Результаты поиска

Содержание 100B SFF

Отзывы:

Бренды по названию

Популярные бренды