HP 100B SFF Скачать руководство пользователя

Страница: 48 / 104

You must choose one of the following methods to perform a System Recovery:

●

Recovery Image

— Run the System Recovery from a recovery image stored on your hard disk

drive. The recovery image is a file that contains a copy of the original factory-shipped software. To

perform a System Recovery from a recovery image, see

System Recovery from the Windows Start

Menu on page 40

NOTE:

The recovery image uses a portion of the hard disk drive that cannot be used for data

storage.

●

Recovery Discs

— Run the System Recovery from a set of recovery discs that you create from files

stored on your hard disk drive or purchased separately. To create recovery discs, see

Recovery

Discs on page 42

System Recovery Options

You should attempt a System Recovery in the following order:

Through the hard disk drive, from the Windows Start menu.

Through the hard disk drive, by pressing the

F11

key on the keyboard during system startup.

Through recovery discs that you create.

Through recovery discs purchased from HP Support. To purchase recovery discs, visit

http://www.hp.com/support

System Recovery from the Windows Start Menu

CAUTION:

System Recovery deletes all data and programs you created or installed. Back up any

important data to a removable disc.

If the computer is working and Windows is responding, use these steps to perform a System Recovery.

Turn off the computer.

Disconnect all peripheral devices from the computer except the monitor, keyboard, and mouse.

Turn on the computer.

Click the

Start

button, click

All Programs

, click

Recovery Manager

, and then click

Recovery Manager

. If prompted, click

Yes

to allow the program to continue.

Under

I need help immediately

, click

System Recovery

Select

Yes

, and then click

Next

. Your computer restarts.

NOTE:

If your system does not detect a recovery partition, it prompts you to insert a recovery

disc. Insert the disc, select

Yes

, and then click

Next

to restart the computer and run Recovery

Manager from the recovery disc. Insert the remaining recovery discs when prompted.

When the computer restarts, once again you see the Recovery Manager welcome screen. Under

need help immediately

, click

System Recovery

. If you are prompted to back up your files,

and you have not done so, select

Back up your files first (recommended)

, and then click

Next

. Otherwise, select

Recover without backing up your files

, and then click

Next

System Recovery begins. After System Recovery is complete, click

Finish

to restart the computer.

Complete the registration process, and wait until you see the desktop.

10.

Turn off the computer, reconnect all peripheral devices, and turn the computer back on.

Содержание 100B SFF









































































































Результаты поиска

Содержание 100B SFF

Отзывы:

Похожие инструкции для 100B SFF

Бренды по названию

Популярные бренды

HP 100B SFF, Руководство по обслуживанию и ремонту

Результаты поиска

Содержание 100B SFF

Отзывы:

Похожие инструкции для 100B SFF

Бренды по названию

Популярные бренды