background image

 

49 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8    Troubleshooting Without Diagnostics 

 

 

 

 

 

 

 

This chapter provides information on how to identify and correct minor problems, such as diskette drive, 

hard drive, optical drive, graphics, audio, memory, and software problems. If you encounter problems 

with the computer, refer to the tables in this chapter for probable causes and recommended solutions. 

 

NOTE: 

For information on specific error messages that may appear on the screen during Power-On 

Self-Test (POST) at startup, refer to 

POST Error Messages on page 84

 

Safety and Comfort 

WARNING! 

Misuse of the computer or failure to establish a safe and comfortable work environment 

may result in discomfort or serious injury. Refer to the 

Safety & Comfort Guide 

at 

http://www.hp.com/ 

ergo 

for more information on choosing a workspace and creating a safe and comfortable work 

environment. For more information, refer to the 

Safety & Regulatory Information 

guide. 

 

Before You Call for Technical Support 

If you are having problems with the computer, try the appropriate solutions below to try to isolate the 

exact problem before calling for technical support. 

●   

Run the HP diagnostic tool. 

●   

Run the hard drive self-test in Computer Setup. 

●   

If the computer is beeping, the beeps are error codes that will help you diagnose the problem. 

Refer to 

POST Error Messages on page 84 

for more information. 

●   

If the screen is blank, plug the monitor into a different video port on the computer if one is 

available. Or, replace the monitor with a monitor that you know is functioning properly. 

●   

If you are working on a network, plug another computer with a different cable into the network 

connection. There may be a problem with the network plug or cable. 

●   

If you recently added new hardware, remove the hardware and see if the computer functions 

properly. 

●   

If you recently installed new software, uninstall the software and see if the computer functions 

properly. 

 

Содержание 100B SFF









































































































Отзывы: