manualshive.com logo in svg

Hoval TopGas 35, Техническая информация Инструкции по установке, Страница: 24 / 36

Поделиться
Скачать
Hoval TopGas 35 Скачать руководство пользователя страница 24

24

4 213 893 / 01

MONTAGE

4.6.1  Regulations for electrical connections

All  electrical  installation  work,  in  particular  implementa

-

tion of protective measures, must be performed in accord

-

ance with the pertinent laws and any specific regulations 

imposed by the local energy company; local requirements 

must be observed in particular.

During assembly of the system, the requirements of VDE 

0100 and the regulations imposed by the responsible en-

ergy company must be complied with.

Accident prevention regulations

«General regulations (VBG1)»

«Electrical installations and equipment (VBG4)»

Electrical connections must be established in accord-

ance with the electrical connection diagram enclosed 

with the boiler. The electrical connection diagram does 

not include protective measures. The appropriate protec-

tive measures must be implemented during installation of 

the system and when connecting the unit in accordance 

with VDE 0100 and the regulations of the local energy 

company.

The boiler is only to be installed in rooms corresponding 

to the protection class of the appliance (IP20). To prevent 

induction voltages, low voltage and power current cables 

(230 V~) must be routed separately at a distance of at 

least 10 cm. Where low voltage and power current cables 

have to be installed in cable ducts, these are to be kept 

apart by a separator.

4.6.2  Electrical connection (mains) 230 V, 50 Hz

The boiler is wired ready for connection. It is fitted with a 

connector cable of approx. 1,5 m length with main con

-

nector plug. A socket is to be installed directly adjacent 

to the boiler (maximum 1 m from the edge of the casing). 

The fusing is to be selected so that the limits detailed in 

the Technical Data are never exceeded.

Non compliance with this regulation can have serious 

consequences for the controller in the event of a short 

circuit. 

When working on the gas boiler the appliance is to be dis-

con nected from the electrical supply! 

The applicable accident prevention regulations and the 

generally recognised rules of the art are to be complied 

with for the electrical installation and commissioning.

WARNING

Automatic firing units are safety devices and 

are not to be opened.

4.6.3  Boiler control / electrical connection diagram

The electrical connection is to be executed correspond-

ing to the electrical connection diagram in the boiler.

4.6.4  Connection of the heating controller

4.6.4.1  TopTronic

®

 RS-OT

The TopGas

®

 (35,45,60) is delivered as standard with a 

TopTronic

®

 RS-OT controller for external mounting. Your 

Hoval agent will provide you with a detailed description of 

the scope of supply.

4.6.4.2  TopTronic

®

 E

As an option the TopGas

®

  (35,45,60)  can  be  equipped 

with a TopTronic

®

 E controller incorporated in the appli-

ance. 

Your Hoval agent will provide you with a detailed descrip-

tion of the power outputs of this type of controller. The 

installation of the TopTronic

®

  E  -  ZE1-is  described  in  a 

separate instruction.

 - TopTronic

®

 E

In principle the TopTronic

®

  E  controller  (WEZ)  permits 

weath er-supported flexible heating operation of two reg

-

ulated mixer circuits, a direct circuit plus the hot water 

provision with an indirectly heated water heater (e.g. Ho-

val CombiVal).

A possible hydraulic system is detailed under chapter 

4.4.6.

Содержание TopGas 35





































Отзывы:

Нет отзывов