horsch Tiger 3 MT, Руководство по эксплуатации

Страница: 49 / 94

Wide tips (for large working depth) are recom-
mended for light soil.
Changing the coulter
The following must be observed when replac-
ing components of the MulchMix, LD and ULD
coulter (coulter tips, guide plates, wings):
¾
Use only original HORSCH wear items.
¾
Use new screws and nuts with each replace-
ment.
¾
Check for correct seating of the four-cornered
shaft coulter screws in the coulter tips and
guide plates:
¾
Observe the sequence when tightening
MulchMix coulter tips together with guide
plates:
1.
2.
3.
¾
Tighten the screw connections for mounting
the wings on the nut. Do not tighten on the
screw head.
¾
Tighten all screw connections with a nutrunner
or torque spanner.
¾
Observe the tightening torque: 160 ± 10 Nm
Levelling discs
Levelling discs are installed behind the tines to
prevent ridge formation during any conditions
of use.
The discs distribute the thrown up soil and level
the ground in front of the packer.
Depth setting
The levelling discs must be adjusted after ad-
justing the tools.
The discs distribute the thrown up soil and level
the ground in front of the packer.
1. Open the lock valves of the levelling discs.
Levelling discs lock valve
45