horsch Terrano 10 FM, Руководство по эксплуатации

Страница: 53 / 67

Maintenance overview
Maintenance location Work instructions Interval
After 10 operating hours
Retighten all screw and plug-in
connections as well as the hydraulic
connections.
Even firmly tightened screw connections can come loose
(e.g. because of material settlement or paint residues be-
tween the screw elements). This can lead to loose screw
connections and leaking hydraulic connections.
Retighten the wheels - all
M18 x 1.5 - 300 Nm
M22 x 1.5 - 510 Nm
¾
initially after 10 hours or 50 km
¾
again after 10 hours or 50 km
¾
then retighten daily until the screws have settled and
further tightening is no longer possible.
¾
then always before the start of the season and every
50 operating hours during use.
Tines TerraGrip 3L Retighten mounts, see figure below
Before the season
Complete machine Read the operating instructions carefully as a refresher
Check all
screw connections for firm seating, retighten as
necessary
Check condition and function of all protective features and
replace, if necessary
In use
Hydraulics
WARNING
Lower all hydraulically lifted parts (e.g. wings, packer, undercarriage,
etc.) to the ground before performing any work on the hydraulic system.
Depressurise the hydraulics on the tractor and implement side!
Allow hydraulic oil and hydraulic components heated during operation to
cool down before any work on the hydraulic system.
Observe the notes on hydraulics in the chapter
Safety and responsibility .
Hydraulic system and components Check all hydraulic components and hoses for function,
leak tightness, fastening and chafing
40 h
Hydraulic hoses
Check the hydraulic hoses regularly for damage (cracks, chafing, etc.).
Replace damaged and faulty hoses immediately.
Hydraulic hoses must be replaced after 6 years. Pay attention to the
manufacturing date on the crimp sleeve (year/month) and the hose
(quarter/year):
Crimp sleeve Hose
Depending on the conditions of use (e.g. weather influences) or in case
of higher strains on the machine the hoses may need to be replaced
earlier.
Have the hydraulic system checked by an expert at least once every
year.
In addition follow the country specific regulations and directives.
Electrics
Electrical lines Check for damage 40 h
Terrano 10/12 FM
|
10/12 FM (3 m)
48