horsch SW 600, Руководство пользователя

Страница: 78 / 100

78 SW600 Owner’s Manual – Version 1.2 07/2018
www.horsch.com
Track Lubrication Table
Use and description Location Viscosity grade
Grease for heavy
mechanical components Carrier Axle hubs/bearings
and frame pivot joints
NLGI GC-LB
Oil Bath Reservoirs
Idlers and Mid-roller Hubs
and Mid-roller axle pivots 10W30 Universal
Transmission / Hydraulic Oil
Track Maintenance Schedule
Task
Daily
or 10h
Weekly
or 50h
Monthly
or 100h
Annual
or 500hr
5 years or
2000hr
Inspect and clean track system
X
Inspect track condition
X
Check track alignment
X
Inspect for oil leaks on idler,
mid-roller hubs and pivot axles
X
Grease undercarriage and track
system pivot points
X
Check track tension
X
Re-torque wheels
X
Repack carrier roller bearings
X
Replace hub and pivot oil and set
wheel bearing rolling torque
X
Daily Maintenance, or every 10 working hours
1.
Clean and remove debris from track system. Material build-up on track system
components can lead to excessive wear and premature failure.
2.
Track system inspection. Walk around the machine inspecting each track system and axle
assembly. Identifying and resolving issues early is key to improving track system life and
decreasing operating expenses. See “Track System Inspection” in the Routine maintenance
section for more information.
3.
Check rubber track alignment daily by inspecting the guide lugs. If excessive wear or chunking