horsch SW 600, Руководство пользователя

Страница: 61 / 100

SW600 Owner’s Manual – Version 1.2 07/2018 61
www.horsch.com
Roller Replacement with Full Tank
1. Loosen and remove the wing screws on the side cover and drive motor and remove the side cover
and motor.
2. Remove snap ring and plain washer from the drive shaft.
3. Slip the new cellular roller on to the drive shaft, thus pushing the old roller out on the motor side.
4. Remove the drive shaft from the old roller and install it in the new one; install the side cover and
motor and fasten it in place. (See picture below of new roller to left pushing old roller out.)
Roller for Small Seeds
The rollers for seeding small seeds comprise of the fluted discs, the spacers and the drive shaft.
In order to prevent malfunctions when seeding small seeds, the metering rollers are completely
preassembled in the factory.
The rollers can be mounted with one or two fluted discs. If a roller is fitted with two fluted discs this
doubles the discharge rate.
See Tables on next page.