horsch Cruiser 10 XL, Руководство по эксплуатации

Страница: 16 / 71

Changing equipment/wear items
¾
Only pulling tools may be attached that meet
the technical requirements according to these
operating instructions.
HORSCH does not assume any liability for
damages resulting from the attachment of
non-fitting pulling tools as well as incorrect
mounting.
¾
For machines with valid type approval only
pulling tools may be attached that are covered
by the type approval. Attaching pulling tools
not covered by the type approval will void the
registration.
¾
Secure the machine against unintended roll-
ing away!
¾
Secure raised frame parts you have to work
under with suitable supports!
¾
Caution! Danger of injury caused by projecting
parts (e.g. coulters)!
¾
Assume ergonomic working postures with any
assembly work.
¾
Do not use packer tyres or other rotating parts
to climb on the machine. These could rotate
and you could be seriously injured by falling
down.
Fertiliser and dressed
seed
Inappropriate handling of fertiliser and dressed
seed can cause poisoning and death.
¾
Follow the information given in the safety data
sheet of the manufacturer. If necessary, ask
the dealer for the safety data sheet or safety
notes.
¾
Determine and provide the personal protective
outfit as specified by the manufacturer.
Environmental protection
Operating materials such as hydraulic oil, lubri-
cants, etc. can damage the environment and the
health of persons.
¾
Do not allow operating materials to drain out
into the environment.
¾
Take up drained operating materials with
absorbent material or sand, fill it into a leak
tight tank and dispose of in accordance with
statutory regulations.
12