HYDROSTIK PRO_UM_121031
7
VI. (Re)Filling HYDROSTIK PRO Cartridge
There are two options for (re)filling the HYDROSTIK PRO Metal Hydride Cartridge. How these
operations are carried out is stated in this paragraph.
Note that all directions are based on the equipment used as standard by Horizon Fuel
Cell Technologies. We cannot feasibly cover all international variations of equipment,
threads and dimensions and therefore omit these details to reduce confusion. Therefore
we highly recommend that you read through the instructions without putting the equipment
together to familiarize yourself with the process and make sure you have all the correct
components. It is very important that the connections equipment match, as any leakage is
very dangerous.
●
Option I - Direct Cartridge (Re)Filling
(1)
Use a wrench to (anti-clockwise) screw securely the dual headed pressure regulator to the
pressurized hydrogen cylinder that can be obtained from a local gas company (Fig. 1&2).
(2)
Again using a wrench, screw the nut on the hydrogen cable to the dual headed
pressure regulator provided. The nut needs to be tightened by turning the wrench
anticlockwise (Fig. 3&4).
IMPORTANT
Fig. 1
Fig. 2
Fig. 3
Fig. 4
