HYDROSTIK PRO_UM_121031
12
(7)
Before connecting the HYDROSTIK PRO for filling, we must get rid of any non-Hydrogen
gases from the system. Open (clockwise) the regulator’s valve to 1 Bar (14.5PSI) for 5secs
and then close (counter-clockwise) it again (Fig. 14).
(8)
Screw (clockwise) the HYDROSTIK PRO cartridge onto the SWAGELOK / Horizon adaptor
assembly (Fig. 15&16).
(9)
Fill the water basin with water (ambient temperature). This helps the refueling process in
two ways:
1.
To help the absorption of Hydrogen into the metal hydride by keeping the cartridge
cool.
2.
To be able to check for any leakages coming from the cartridge, cable or connection
points.
Place the HYDROSTIK PRO connected to the SWAGELOK/hose assembly
horizontally into the water basin (Fig. 17).
Fig. 14
Fig. 15
Fig. 16
NOTE
Fig. 17
