horiba LAQUA F-71G, Инструкция по эксплуатации

Страница: 15 / 102

Product Handling Information
XIII
■
Product Handling Information
●
Operational precautions
●
Only use the product including accessories for their intended
purpose.
●
Do not drop, crash, or give any physical impact on the instrument.
●
Do not immerse the instrument into alcohol, organic solvent, strong
acid, strong alkaline, or the like. The instrument body contains ABS
resin, acrylic resin, and some rubber parts.
●
If the instrument is dropped into water or gets wet, wipe it using soft
cloth. Do not heat to dry it with a hair-dryer (or the like).
●
Use fingers to press the operation keys or the touch panel.
Do not use a hard object like a metal stick or rod.
●
Be careful not to let water into the instruction inside.
The instrument is not water-proof.
●
To disconnect an electrode or interface cable, hold the connector and
pull it off. If you pull at the cable, it may cause a breakage.
●
The touch panel is capacitance-type. Make sure to turn OFF the
power before cleaning the panel. If you wipe it with the power ON, it
may cause instrument malfunction.
●
RS-232C or USB communication between the instrument and a per-
sonal computer may fail because of environmental conditions, such
as (radio/electromagnetic) noise.
●
Make sure to use the provided power supply cable to power this
product.
●
Environmental conditions for use and storage
●
Temperature: 0
°
C to 45
°
C
●
Humidity: under 80% in relative humidity and free from
condensation
Avoid the following conditions:
●
Dusty environment
●
Strong vibration
●
Direct sunlight
●
Corrosive gas environment
●
Close to an air-conditioner
●
Direct wind
●
Transportation
When transporting the instrument, repackage it in the original package
box. Otherwise, it may cause instrument breakage.
●
Disposal
Standard solution used for the calibration must be under neutralized
before the disposal. As for the disposal of the meter, treat it as an
industrial waste.