horiba JOBIN YVON SYNAPSE, Руководство пользователя

Страница: 65 / 116

55
Chapter 9: Powering Down and Disassembly of
the System
This chapter provides the necessary steps to methodically and safely power down your
Synapse CCD detection system. In addition, information is presented that details the
proper disassembly process for your detection system.
Power Down Procedure
•
Exit the application software.
•
Set the power switch on the back of the power supply to the
OFF
(“
O
” symbol)
position.
Disassembly of the Detection System
In instances where the experiment set-up needs to be disassembled, the following steps
should be taken in the order specified:
1. Exit the application software.
2. Set the power switch on the back of the power supply to the
OFF
(“
O
” symbol)
position.
3. Disconnect the power cable interfacing between the power supply unit (P/N
354010) and the detector head.
4. Disconnect the BNC shutter cable interfacing between the spectrograph and the
detector.
5. Remove the USB 2.0 communications cable (P/N 980076) from the back panel of
the detector head.
Note
: It is safe to leave the Synapse detector un-
powered and mounted to the spectrograph as
long as all system cables interfacing to the
detector remain securely connected.
Note
: The HORIBA Jobin Yvon warranty on Synapse
does not cover damage to the sensor or the
system’s electronics that arises as a result of
improper handling including the effects of
Electrostatic Discharge (ESD).