horiba JOBIN YVON SYNAPSE, Руководство пользователя

Страница: 62 / 116

Detector System Component Description
52
Power Supply Unit Electrical Interfaces
The Synapse power supply unit
provides the following external in-
terface connections for proper system
operation:
•
AC Input Power
•
Detector Head Power
•
Power Status LED
Figure 15.
Power Supply Unit Electrical Interfaces
AC Input Power
The Synapse power supply unit operates from universal AC single-phase input power
over the range of 85 to 264 V AC with a line frequency of 47 to 63 Hz. This AC input
power is applied to a two-pole fusing power entry module located on the rear panel of the
power supply unit. This module incorporates two 5 x 20 mm IEC approved, 2.0 A, 250
V, ceramic slow blow fuses (Cooper Bussmann Part# BK / GDC-2A or equivalent) to
protect against line disturbances/anomalies outside the system’s normal operating power
range.
Detector Head Power
The detector head power receptacle, located on the front panel of the power supply unit,
utilizes a 16-pin circular Lemo connector to provide the required DC input power to the
detector head via the detection system’s power cable (JY# 400735).
Power LED
Illumination of the PWR LED, located on the front panel of the power supply unit,
indicates that the unit has been powered.