HORIBA
General notes
NOx Converter Checker CC-100E
5/ 24
1.4 Applied EU directives and standards
This appliance complies with the following directives and standards:
Directive 2014/35/EU
of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of Member States relating to the making available
on the market of electrical equipment designed for use within certain voltage
limits (Low Voltage Directive)
Directive 2014/30/EU
of the European Parliament and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States relating to electromagnetic
compatibility (EMC Directive)
EN 61010-1:2011-07
Safety requirements for electrical equipment for measurement, control, and
laboratory use - Part 1: General requirements
EN 61326-1:2013-07
Electrical equipment for measurement, control and laboratory use - EMC
requirements - Part 1: General requirements - Part 1: General requirements
1.5 Intended use
HORIBA's CC-100E is used to check the efficiency of the conversion of NOx to NO, as is common in NOx
analysers in flue gas analysis or process gas measurement. By means of ozone production through high-
voltage discharge and mixing with externally supplied nitrogen monoxide (NO), exact NO2 concentrations
are generated in a short reaction time.
