Installation and commissioning
HORIBA
12/ 24
NOx Converter Checker CC-100E
4 Installation and commissioning
4.1 Before installation
Be sure to observe the following instructions before installation and commissioning:
NOTE
Installation
Installation must only be carried out by qualified personnel.
a)
Follow all instructions in this manual.
b)
Modifications to the unit are prohibited.
c)
Operate the unit only within the specified limits.
WARNING
Transport damage
Inspect the unit carefully for damage before operation. Safe operation is not
possible,
- if there is visible damage to the unit,
- if the unit no longer works correctly or
- After storage under damaging conditions
If one of these points applies, you must put the unit out of operation and secure it
against unintentional operation.
DANGER
Electrical voltage
Improper connection may result in electric shock or fire.
a)
Make sure that the supply voltage corresponds to the specifications on the type
plate.
b)
Only connect the unit with the mains cable supplied. Do not use the mains cable
for other devices.
c)
Do not open the unit! There are high-voltage components in the unit.
d)
Only connect the unit to an earthed socket.
WARNING
Potentially hazardous gases
Hazardous gases are passed through the appliance. There is a risk of poisoning
and/or suffocation if the gas is not connected properly.
a)
Make sure that the operating pressure complies with the specifications.
b)
Use only high purity gas.
c)
Ensure that the work area is well ventilated and that exhaust fumes are safely
discharged.
d)
Only use the specified connectors and lines and connect them gas-tight without
leaks.
