- 3 -
11)
The system may arm/disarm the unit and set up the parameters of the host via message or
phone call.
12)
The system may add/reduce the quantity of controllers and detectors as required (8-channel
wireless defense area and 2-channel wired defense area),can use all kinds of detectors such as
smog, gas vibration and IR opposite-type detectors GSM platform.
3. Installation
3.1 Cautious for installation
1)
It should get permission of the public security department before setting up the alarm number
of local commanding center.
2)
The host should be placed at the concealed area where is protected and monitored by the
detector, away from strong electromagnetic interruption, don't place it together with other
objects, the alarm horn should be installed at the proper position, the emergency button and
foot-touch switch should be installed at the convenient positions.
3)
The power cable of the host should be concealed and connected in good condition，good heat
emission is required, keep it away from flammable materials.
4)
Switch off the power before removing/installing SIM card.
5)
The batteries of detectors and controller should be regularly checked and replaced in time if they
are used up.
6)
Check the SIM card regularly (such as network signal and fee).
7)
Test the working status of the alarm system regularly.
8)
The unit is designed for usage in indoor environment only.
3.2 Description of the the panel.
L1: Power switch
L2: DC12V socket
L3: Interface of alarm horn and wired
defense area
L4: GSM antenna
L5: External power supply indicator
L6: Arm/disarm status indicator
L7: Alarm status indicator.
L8: Network signal indicator
L9: Running status indicator of the host.
L10: Linkage output indicator
L11: Microphone monitoring status
indicator.
