- 4 -
L12: Charging status indicator.
3.3 Description of L3 ports
3.4 installation of the host
Switch off the power. Open the cover at the bottom and insert a GSM SIM card (has the functions
of calling and receiving /sending message and incoming caller display), install the antenna and finally
connect the power cable.
3.5 Installation of the detector
Passive IR wireless detector should be visibly installed at the central position of defense area, with
proper height and angle, the wireless door-magnet detector should be installed as per the minimum
angle of opening the door, the distance between the magnet and magnetic switch should be shorter
Note:
L5: Turn on in case of external power supply, turn off of no external power supply
L6: It is means arming status if the green indicator blinks and means disarming status if always
lighted.
L7: Red indicator means the host is busy (alarming, sending message and calling)
L8: Network signal indicator, at means it's in searching status if the indicator blinks with time
interval of on a second.it means the network signal is normal if the indicator keeps on for one
second and keeps off for three seconds. If not, the SIM card or network is not n normal use.it
means it's in calling status if it always keeps on.
L9: Running status indicator of the host, when alarm is activated, the indicator is turned on with
beep sound.
L10: Linkage output indicator, the indicator always keeps on when the linkage relay is closed.
L11: Microphone one monitoring status indicator, it means it's in monitoring status if the
indicator is turned on, and it's means the monitoring function is closed if the indicator is turned
off.
L12: Charging status indicator, the indicator always keeps on when charging till it's fully charged.
