- 11 -
on.
5.2 Operate the host remotely
All functions of the host may be conducted via message or phone call, dial the host number and
then press 1234+operation code after hearing the alert from the host, a long beep sound means the
successful operation, two beep sounds mean the operation is not completed and please repeat the
operation.
5.3 Emergency alarm
In case of accident, press Speaker key on the controller, the host will enter emergency alarming
status immediately and start the external alarm born(automatically stop in 90 seconds), and
meanwhile the host will send an emergency alarm message to the mobile phone and call the three
alarm numbers circularly.
5.4 Fault alarm of external power supply
When the host detects the external power supply has fault or power-fail for over two seconds, the
host will enter emergency alarming status immediately and meanwhile send a power-fail alarm
message to the mobile phone and call the three alarm receiving numbers circularly. When the power
supply is recovered, the host will send a message to the mobile phone to tell the recovery of power
supply and call the three alarm receiving numbers circularly.
5.5 Alarm treatment
In case of alarm, the host will automatically start the alarm horn for 90 seconds to alert the
people ,and meanwhile send message(shows the name of the defense area) and call the preset alarm
receiving number and monitor the on-site conditions. The user may answer the phone and then
press
01#
to arm defense or press
01*
to disarm, if the master's phone is busy or couldn't get
through, the system will automatically call the next alarm number till the master answers (call the
three alarm receiving numbers circularly).
Note:
the host will still keep in arming status if no operation is made after receiving the alarm.
6. System Configurations
One GSM dual-frequency (four-frequency) alarm host, one power adapter, one GSM antenna, two
wireless gate-magnetic detectors, two remote controllers, one alarm horn.
7. Technical Specifications
1)
Dimensions:177mm*117mm*26mm(host excluding the antenna holder and the ledge)
2)
Weight: 0.27kg
3)
Working voltage: AC 100V-250V, DC9V-12V
4)
Working current: Idle status<100MA,alarming status<2.500MA
5)
Backup power supply: 7.2V1000MA/H(idle status>12hours)
6)
Contact current of the linkage relay: 2A
