Honeywell UltraKey Touch HJC4000, Инструкция по установке и эксплуатации

Страница: 46 / 78

46
Connecting UltraKey Touch to a DVR
Controlling an HRXD/HRSD DVR
Step 1: Connection
See Figure 3-3 on page 28 , and Figure 3-4 on page 32 .
Step 2: Keyboard Setup for Connection
HRXD DVR setup is the same as the FUSION DVR setup
except that you select
HRXD (see Controlling a FUSION DVR
on page 43 ).
Operating an HRXD DVR
DVR Selection:
HRXD
Table 3-9 Operating an HRXD DVR
You want to... Do this...
Select a DVR Press a number key + DVR , or DVR + number key + Ent .
Enter numbers for a password Press and hold the Alt key and then press the number keys.
Access the DVR menus Press F1 to open the password screen. Press and hold the
Alt key, and enter the password. Then press Ent to access
the DVR setup menu.
Navigate the DVR menus Use the following keys.
Cycle through the display settings Press Split to select the next display setting (in the cycle of
4x4, 3x3, 2x2 and PIP).
Press... To...
Slider_Up or F2 Move up
Slider_Down or F7 Move down
Slider_Left or F6 Move left
Slider_Right or F8 Move right
Ent Select an option.
F1 Exit the current menu. If the user
presses
F1 when in the Setup
screen, the DVR exits the menus
and returns to normal operation.
Also used to enter the menu.