Honeywell Thor VM2, Руководство пользователя

Страница: 328 / 398

316 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
To Use Sign On Screen
1. After completing the other entries in the profile, click on the Credentials button.
Leave the Username and Password blank. No entries are necessary on the Creden-
tials screen for LEAP or LEAP/WPA.
2. For PEAP-MSCHAP and PEAP-GTC, importing the CA certificate into the Windows
certificate store is optional.
3. For EAP-TLS, import the CA certificate into the Windows certificate store. Also
import the User Certificate into the Windows certificate store.
4. Access the Credentials screen again. Make sure the Validate server and Use MS
store checkboxes are checked.
5. The default is to use the entire certificate store for the CA certificate. Alternatively,
use the Browse button next to the CA Cert (CA Certificate Filename) on the
Credentials screen to select an individual certificate.
6. For EAP-TLS, also enter the User Cert (User Certificate filename) on the credentials
screen by using the Browse button.
7. Click the OK button then the Commit button.
8. When the device attempts to connect to the network, a sign-on screen is displayed.
9. Enter the Username and Password. Click the OK button.
10. Verify the device is authenticated by reviewing the Status tab. When the device is
property configured, the Status tab indicates the device is Authenticated and the
method used.
11. The sign-on screen is displayed after a reboot.
Note: See Configuring the Profile for more details.
If a user enters invalid credentials and clicks OK, the device associates but does not
authenticate. The user is again prompted to enter credentials.
If the user clicks the Cancel button, the device does not associate. The user is not
prompted again for credentials until:
• the device is rebooted,
• the radio is disabled then enabled,
• the Reconnect button on the Diags tab is clicked or
• the profile is modified and the Commit button is clicked.