manualshive.com logo in svg

Honeywell Thor VM2, Руководство пользователя, Страница: 283 / 398

Поделиться
Скачать
Honeywell Thor VM2 Скачать руководство пользователя страница 283

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

271

Explore

•

From the ActiveSync Dialog on the Desktop PC, tap the Explore button.

•

From the Windows Mobile Device Center interface select File Management > Browse 
the contents of your device.

This function allows you to explore the Thor VM2 from the PC side, with some limita-
tions. You can copy files to or from the mobile device by drag-and-drop. You will not be 
allowed to delete files or copy files out of the \Windows folder on the mobile device. 
(Technically, the only files you cannot delete or copy are ones marked as system files in 
the original build of the Windows image. This, however, includes most of the files in the 
\Windows folder).

Backup Data Files using ActiveSync

Use the following information to backup data files from the Thor VM2 to a desktop or 
laptop PC using the appropriate cable and Microsoft’s ActiveSync.

Prerequisites

A partnership between the mobile device and ActiveSync has been established. 

•

A desktop or laptop PC with an available USB port and a mobile device with a USB 
port. The desktop or laptop PC must be running Windows XP or greater.

•

Use the USB-specific cable as shown above.

Connect

Connect the USB cable to the PC (the host) and the mobile device (the client). 

The “Get Connected” wizard on the host PC checks COM ports to establish a connection 
for the first time.

Note:

USB synchronization will start automatically when the cable is connected.

D9 Connector

USB Host Connector

USB Client Connector

Содержание Thor VM2















































































































































































































































































































































































































Отзывы:

Нет отзывов