Honeywell Thor VM2 Скачать руководство пользователя страница 48

Страница: 48 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

USB Connector(s)

An additional USB host port is located on the top of the Enhanced Dock. Lift the cover to
access the USB port.

Ethernet Connector

An Ethernet port is located on the top of the Enhanced Dock. Lift the cover to access the
Ethernet port.

Note:

A BIOS and operating system upgrade is necessary to support the Ethernet port. See

Thor

VM2 and Enhanced Dock Support

for information.

Standard Dock

Enhanced Dock

The USB or USB1 connector is a D-
9 female connector located on the
back of the dock. See

USB and

USB1 Connector

for connector pin-

out detail.

See

for more information.

The USB-2 connector is a D-15
female connector located on the
back of the dock. See

USB2

Connector

for connector pinout

detail.

Power the Thor VM2 off before
attaching a cable to any port (serial,
USB, Audio/CAN, etc.).

COM1

COM2

USB

CANBUS/AUDIO

Содержание Thor VM2















































































































































































































































































































































































































Результаты поиска

Содержание Thor VM2

Отзывы:

Бренды по названию

Популярные бренды

Honeywell Thor VM2, Руководство пользователя

Результаты поиска

Содержание Thor VM2

Отзывы:

Бренды по названию

Популярные бренды