Honeywell Thor VM2 Скачать руководство пользователя страница 134 | Manualshive

Страница: 134 / 398

Honeywell Thor VM2 Скачать руководство пользователя страница 134

122

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

WAN Remote Mount Antenna

The WAN remote mount antenna can be either a magnetic mount or an adhesive mount
antenna.

The Remote Antenna Installation Kit consists of the WAN antenna and an extension
cable. The remote antenna is mounted on the top of a forklift, truck or other vehicle and
cabled to the Thor VM2 inside the vehicle.

1. Locate a mounting position on highest point on the vehicle, following these precau-

tions:

•

The antenna must be mounted so the antenna is not damaged while the vehicle
or any of its parts are moving.

2. Clean the area where the antenna is to be mounted.

3. If using an adhesive mount antenna, remove the protective backing paper from the

adhesive on the antenna.

4. Position the antenna on the vehicle.

5. Attach the one end of the coaxial cable to the antenna and the other end to the

Mobile Net WWAN connector on the vehicle mounted Thor VM2.

6. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the

cable is routed so it is not damaged by any moving parts of the vehicle.

Magnetic Mount WAN Antenna

Adhesive Mount WAN Antenna

To extension cable

To antenna

To antenna
connector on
computer

To extension cable

To antenna

To antenna
connector on
computer

«
...
132
133
134
135
136
...
»

Содержание Thor VM2















































































































































































































































































































































































































Отзывы:

Нет отзывов