Honeywell Thor VM2, Руководство пользователя

Страница: 236 / 398

224 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Network Capture
Start > Settings > Control Panel > Network Capture
Note: Verify the Date / Time before using the logging utilities to ensure meaningful data.
The Network Capture panels provide configuration options for logging utilities. Two
types of logging are configurable:
• Netlog is a Windows CE utility that monitors network traffic. Netlog creates a .CAP file
that can be read using Microsoft Windows Network Monitor or any compatible tool
that supports .CAP files.
• NDISLog monitors the NDIS interface between the Summit radio and the NDIS
driver. This utility creates a .TXT log file.
Factory Default Settings
Netlog
Use this control panel to configure the Netlog utility. By configuring Netlog using the
control panel, Netlog remains running across a warmboot. However, please note that:
• Netlog first stores data to a file named netlog0.cap, then netlog1.cap. Any time the
current file reaches maximum size, Netlog switches to the other file.
• If the log file is stored in the root directory, any previous data is lost and a new log file
started after the warmboot
• If the log file is stored in \System, all previous data is saved across the warmboot.
• If Netlog is enabled across the warmboot, a series of brief popups may be displayed
during the boot cycle. No user interaction is required.
Netlog
Command options
pkt_size in bytes 5000
cap_size in bytes 500000
.cap file \netlog
Promiscuous Mode Disabled
NDISLog
Command stop
file \ndislog.txt