Honeywell Thor VM2, Руководство пользователя

Страница: 105 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 93
Fuse Requirements
• For all voltages , use the 3A fuse from the kit or a slow blow fuse that has a DC voltage
rating greater than the vehicle input voltage.
Note: For North America, a UL Listed fuse is to be used.
Power Cable Identification
The DC power cable is included with the dock and is one of the two styles below:
Power cable with right angle connector and 6 wires:
Power cable with straight connector and 4 wires:
Note: Correct electrical polarity is required for safe and proper installation. See Wiring Diagram
for additional wire color-coding specifics.
The Thor VM2 DC input wires (Red, Red/White DC+ and Black, Black/White DC-) and
the Blue ignition input wire are galvanically isolated. The Green ground input is used for
electrostatic discharge (ESD) protection.
Vehicle 50-150VDC Power Connection
1. Please review the Wiring Diagram , before beginning power cable install.
2. The Thor VM2 must not be mounted in the dock. The power switch on the dock must
be turned Off . The power cable must be UNPLUGGED from the dock.
Warning: For proper and safe installation, the input power cable must be
connected to a fused circuit on the vehicle. If the supply
connection is made directly to the battery, the fuse should be
installed in the positive lead within 5 inches of the battery’s
positive (+) terminal. Use VM3055FUSE (or equivalent) to
install the fuse as shown below:
Wire Color Connection
Red DC + (10-60 VDC)
Red/White DC + (10-60 VDC)
Black DC -
Black/White DC -
Twist the red and red/white wires together and
twist the black and black/white wires together
before connecting to vehicle power. Green Ground
Blue Ignition Input
(optional)
Wire Color Connection
Red DC + (10-60 VDC)
Black DC -
Green Ground
Blue Ignition Input
(optional)