Honeywell Thor VM2, Руководство пользователя

Страница: 330 / 398

318 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
6. Uncheck the Use full trusted store checkbox.
7. Select the desired certificate and click the Select button to return the selected
certificate to the CA Cert text box.
8. Click OK to exit the Credentials screen and then Commit to save the profile changes.
Configuring the Profile
Use the instructions in this section to complete the entries on the Profile tab according
to the type of wireless security used by your network. The instructions that follow are the
minimum required to successfully connect to a network. Your system may require more
parameters than are listed in these instructions. Please see your system administrator
for complete information about your network and its wireless security requirements.
To begin the configuration process:
• On the Main tab click the Admin Login button and enter the password.
• If using a single profile, edit the default profile with the parameters for your network.
Select the Default profile from the pull-down menu.
• Make any desired parameter changes as described in the applicable following
section determined by network security type and click the Commit button to save the
changes.
IMPORTANT – Remember to click the Commit button after making changes to ensure
the changes are saved. Many versions of the SCU display a reminder if the Commit but-
ton is not clicked before an attempt is made to close or browse away from the tab in
focus if there are unsaved changes.
If changes are made to the stored credentials, click Commit to save those changes first
before making any additional changes.
No Security
To connect to a wireless network with no security, make sure the following profile
options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set EAP Type to None
3. Set Encryption to None