Honeywell THOR VM1 Скачать руководство пользователя страница 66

Страница: 66 / 324

Folders Copied at Startup

The following folders are copied on startup:

System\Desktop

copied to

Windows\Desktop

System\Favorites

copied to

Windows\Favorites

System\Fonts

copied to

Windows\Fonts

System\Help

copied to

Windows\Help

System\Programs

copied to

Windows\Programs

AppMgr

copied to

Windows\AppMgr

Recent

copied to

Windows\Recent

This function copies only the folder contents, no sub-folders.

The Windows\Startup folder is not copied on startup because copying this folder has no effect on the system or an incorrect
effect

Files in the Startup folder are executed, but only from System\Startup. Windows\Startup is parsed too early in the boot process
so it has no effect.

Executables in System\Startup must be the actual executable, not a shortcut, because shortcuts are not parsed by Launch.

Saving Changes to the Registry

The Thor VM1 saves the registry when you:

Warmboot - either from the Registry control panel, the warmboot command or the reboot keypress sequence.

Restart - from the Registry control panel

Suspend/Resume - Either user initiated or upon Suspend timer expiration.

Shutdown - The registry is saved during a controlled shutdown, such as when the UPS charge reaches a critically low
level and external power is not available.

The registry save process takes 0 – 3 seconds. If nothing has been changed, nothing is saved (e.g. 0 seconds).

3-4

Содержание THOR VM1





































































































































































































































































































































Результаты поиска

Содержание THOR VM1

Отзывы:

Honeywell THOR VM1, Справочное руководство, Страница: 66 / 324

Результаты поиска

Содержание THOR VM1

Отзывы: