Honeywell THOR VM1, Справочное руководство, Страница: 114 / 324

Message Explanation and/or corrective action Level
Timeout looking for app
window
After the application is launched, AppLock must wait until the application has initialized
itself before proceeding. The application did not start successfully and AppLock has timed
out.
LOG_ERROR
ToUser after admin, not
at boot The user mode switch is attempted when the device boots and after the administrator
presses the hotkey. The mode switch is being attempted after a hotkey press.
LOG_EX
ToUser after admin-app
still open The switch to user mode is being made via a hotkey press and the administrator has left
the application open and has not made any changes in the configuration.
LOG_EX
ToUser after admin-no
app or cmd line change
If user mode is being entered via a hotkey press, the administrator may have left the con-
figured application open. If so, AppLock does not launch the application again unless a
new application or command line has been specified; otherwise, it just locks it.
LOG_EX
Unable to move desktop
The desktop is moved when switching into user mode. This prevents them from being vis-
ible if the application is exited and restarted by the timer. This error does not affect the
screen mode switch; processing continues.
LOG_ERROR
Unable to move taskbar
The taskbar is moved when switching into user mode. This prevents them from being vis-
ible if the application is exited and restarted by the timer. This error does not affect the
screen mode switch; processing continues.
LOG_ERROR
Unhook taskbar wndproc
failure AppLock could not remove its control of the taskbar. This error does not affect AppLock
processing
LOG_ERROR
Unhook wndproc failure AppLock could not remove the hook that allows monitoring of the application. LOG_ERROR
Unhooking taskbar
In administration mode, the taskbar should return to normal operation, so AppLock’s con-
trol of the taskbar should be removed.
LOG_EX
Unhooking wndproc
When the administrator leaves user mode, the device is fully operational; therefore,
AppLock must stop monitoring the locked application.
LOG_EX
WM_SIZE adjusted This message denotes that AppLock has readjusted the window size. LOG_EX
X after Ctrl+L Processing the backdoor entry. LOG_EX
Ret from password <#> Return value from password dialog. LOG_EX
Decrypt data len <#> Length of decrypted password. LOG_EX
Window handle to enum-
windows=%x
The window handle that is passed to the enumeration function. This message can be
used by engineering with other development tools to trouble shoot application lock fail-
ures.
LOG_EX
WM_WINDOWPOSCHG
adjusted=%x
Output the window size after it has been adjusted by AppLock LOG_EX
3-52