Honeywell THOR VM1 Скачать руководство пользователя страница 117 | Manualshive

Страница: 117 / 324

Honeywell THOR VM1 Скачать руководство пользователя страница 117

Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected
and disconnected. There may be audible or visual signals as paired devices re-connect with the Thor VM1.

l

The default Bluetooth setting is On.

l

The Thor VM1 cannot be discovered by other Bluetooth devices when the

Computer is discoverable

option is

disabled (unchecked) on the Settings panel.

l

Other Bluetooth devices cannot be discovered if they have been set up to be Non-Discoverable or Invisible.

l

When

Filtered Mode

is enabled, the Thor VM1 can pair with one Bluetooth scanner and one Bluetooth printer.

l

When

Filtered Mode

is disabled, the Thor VM1 can pair with up to four Bluetooth devices

l

It is not necessary to disconnect a paired scanner and printer before a different scanner or printer is paired with the Thor
VM1.

l

The target Bluetooth device should be as close as possible (up to 32.8 ft (10 meters) Line of Sight) to the Thor VM1
during the pairing process.

Assumption: The System Administrator has Discovered and Paired targeted Bluetooth devices for the Thor VM1. The Thor
VM1 operating system has been upgraded to the revision level required for Bluetooth client operation. An application (or API) is
available that will accept data from serial Bluetooth devices.

Bluetooth Devices

The Bluetooth Devices tab displays any device previously discovered and paired with the Thor VM1.

Discover

Tap the Discover button to locate all discoverable Bluetooth devices in the vicinity. The Discovery process also queries for the
unique identifier of each device discovered.

3-55

«
...
115
116
117
118
119
...
»

Содержание THOR VM1





































































































































































































































































































































Отзывы:

Нет отзывов