Honeywell THOR VM1 Скачать руководство пользователя страница 51

Страница: 51 / 324

Keyboard LEDs

The keyboard LEDs are located near the specified key.

2nd LED

LED Behavior

Status

Solid Green

Indicates the

2nd

modifier key is active. 2nd mode is invoked for the next keypress

only.

Pressing the

2nd

key a second time exits this modifier mode and turns off the LED.

Off

2nd mode is not invoked.

Shift LEDs

For the 64 key keyboard, there is one LED next to each

Shift

key. Both LEDs indicate the status of Shift mode and Caps Lock

mode.

For the 12-key keyboard, there is a single

Shift

key and a single LED.

LED Behavior

Status

Blinking Green

Indicates the keypad is in Shift mode. Shift mode is invoked for one keypress.

Pressing the

Shift

key places the system in Shift mode.

To exit Shift mode, press the

Shift

key again.

Solid Green

When solid Green, indicates the keypad is in Caps Lock mode. Caps Lock mode is
invoked until canceled.

Pressing the

2nd

key followed by the

Shift

key places the system in Caps Lock

mode.

To exit Caps Lock mode, press

2nd

Shift

again.

Off

Neither Shift or Caps Lock mode is invoked.

Ctrl LED

The

Ctrl

key is not present on the 12-key keypad.

LED Behavior

Status

Solid Green

Indicates the

Ctrl

modifier key is active. Ctrl mode is invoked for the next keypress

only.

Pressing the

Ctrl

key a second time exits this modifier mode and turns off the LED.

Off

Ctrl mode is not invoked.

2-33

Содержание THOR VM1





































































































































































































































































































































Результаты поиска

Содержание THOR VM1

Отзывы:

Honeywell THOR VM1, Справочное руководство, Страница: 51 / 324

Результаты поиска

Содержание THOR VM1

Отзывы: