Honeywell THOR VM1 Скачать руководство пользователя страница 202

Страница: 202 / 324

Peripherals

Start > Settings > Control Panel > Peripherals

This panel is used to enable and disable the defroster.

Factory Default Settings

Defroster

Enabled (if installed)

Defroster Trip Point

40ºC

Note:

Settings have no effect if the defroster is not installed.

The screen displays the information about the defroster:

If the defroster is installed or not installed

The current state of the defroster, ON or OFF

If the defroster (if installed) is Enabled or Disabled

The defroster trip point.

Tap the

Test

button to determine the presence of the defroster. Use this button when the front panel of the Thor VM1 has been

swapped. For example, if the Thor VM1 did not contain a defroster but a new front panel with a defroster is installed, tap the

Test

button to update the defroster presence status on this tab.

If a defroster is installed, the defroster can be switched between the

Enabled

and

Disabled

states using the radio buttons on

this tab. The default is

Enabled

Specify the

Defroster trip point

. The default trip point is 40ºC/104ºF.

3-140

Содержание THOR VM1





































































































































































































































































































































Результаты поиска

Содержание THOR VM1

Отзывы:

Honeywell THOR VM1, Справочное руководство, Страница: 202 / 324

Результаты поиска

Содержание THOR VM1

Отзывы: