Honeywell THOR VM1 Скачать руководство пользователя страница 142 | Manualshive

Страница: 142 / 324

Honeywell THOR VM1 Скачать руководство пользователя страница 142

COM2 Tab

Start > Settings > Control Panel > Data Collection > COM2

This panel sets communication parameters for any device connected to the external port.

Adjust the settings and click the OK button to save the changes. Any changes take effect immediately.

This panel does not configure the connected device. Please refer to the documentation for the external connected or wireless
device for information on configuring the device.

Note:

COM default values are restored after a cold boot or operating system upgrade. COM2 supports 5V

switchable power on Pin 9 for tethered scanners.

Power on Pin 9

To configure the COM port to supply power to an external scanner tethered to the COM2 port, check the checkbox for Power
on Pin 9 (+5V). The default is On (enabled).

The tethered external scanner is powered by the external device power source.

Wireless external scanners use their own power source.

3-80

«
...
140
141
142
143
144
...
»

Содержание THOR VM1





































































































































































































































































































































Отзывы:

Нет отзывов