Chapter 2 - Planning
The following illustrates the front view of a Dell PowerEdge T610 server (MZ-PCSV22 and MZ-PCSV23)
Tower Unit platform.
2.2.2
Equipment configuration
The Dell PowerEdge T610 server server is used for TPS and Experion nodes and must be rack
mounted only on a 1-meter deep Honeywell equipment cabinet, with model number MP-C1MCB1.
Server model number MZ-PCSV22 is a tower unit. When mounted in a cabinet, the enclosure uses 5U
of space. The mounting hardware is pre-assembled in the Honeywell factory.
Unsupported furniture option
This server cannot be mounted in the following furniture options. Hence, this document does not include
instructions for installing the server in these furniture options.
l
Icon Series console
l
Honeywell cabinets
l
Classic or Z/EZ console
This document does not include instructions for these types of installations.
2.2.3
Electronics module
The electronics assemblies for the server platform CPU are as follows.
l
For 51154292-100 and 51154292-200
Intel Xeon 2.8 GHz (Intel X5560) with 5 x 146 GB Hard Disks, RAID-5 and 2GB (2x1GB) DDR3
advanced ECC memory, 120/240 VAC with level two and three cache memory options.
l
For 51154292-300 and 51154292-400
Intel Xeon 2.4 GHz (Intel E5620) with 5 x 146 GB Hard Disks, RAID-5 and 2GB (2x1GB) DDR3
advanced ECC memory, 120/240 VAC with level two and three cache memory options.
The peripheral electronics assemblies are based upon the Peripheral Component Interconnect Express
(PCIE) bus or USB 2.0.
- 9 -