6. While wearing a grounded ESD wrist strap, press the socket ejectors on the memory module
socket down to allow the memory module to be inserted into the socket.
7. Insert the memory module as described in section
8. Align the memory module’s edge connector with the alignment key on the memory module socket,
and insert the memory module into the socket.
ATTENTION
The memory module socket has an alignment key that allows you to install the memory
module in the socket only in one way.
9. Press down the memory module with your thumbs while pulling up on the socket ejectors with your
index fingers to lock the memory module into the socket.
When the memory module is properly seated in the socket, the socket ejectors on the memory
module socket align with the socket ejectors on the other sockets that have memory modules
installed.
10. Close the shroud and on the chassis and ensure that release handle closes securely.
11. Close the side cover.
12. Replace the server in the cabinet.
13. Reconnect the power cords and cables to the back panel of the server.
14. Press the Power On/Off button on the server, to turn on the server.
- 52 -
Chapter 5 - Servicing