Honeywell SmartLine, Руководство пользователя

Страница: 75 / 130

6. Operation
6.4. Provisioning Device menus
Revision 2 SmartLine Wireles User's Manual 61
Figure 6-2: Security and Node Deployment
To connect your transmitter to the OneWireless network perform the following steps.
Step Action
1
If the Provisioning Device contains no keys, obtain new security keys from
the WDM Provisioning tab
2
When the Provisioning Device has valid unexpired keys, aim it at the
transmitter and transmit a key to the transmitter. The transmitter will validate
the key and then use it to make a connection to the OneWireless network.
The Transmitter may continue to show the diagnostic message “NO KEY” for
a brief time while it validates the key before showing the “DISCOVER”
message.
To verify your transmitter has been provisioned, see the Connection prompt
on the Read Device Information screen
Figure 6-3