Honeywell SmartLine, Руководство пользователя

Страница: 66 / 130

6. Operation
6.2. Transmitter connection status
52 SmartLine Wireless User's Manual Revision 2
6.2 Transmitter connection status
Table 6-1: Transmitter connection status
Displayed
status Definition What to do
NO-KEY
Transmitter needs a key from the
Provisioning Device and is not transmitting. Transmit a key to the transmitter.
See page
60 .
UNJOINED
Transmitter has backed off and is in between
discovery attempts. If Transmitter does not join the network
within five minutes, do the following:

Check that Key is correct for the network
you are trying to join.

Check that FDAP(s) in the local area are
turned on and are already a secure part
of the network.

Check if KeyServer is active.

Check the KeyServer Event Log to see if
the Transmitter is actively trying to join.
Errors in the Event Log show that the
Transmitter is trying to join but that there
are problems. Consult the OneWireless
User Interface documentation for
troubleshooting errors.
DISCOVER Transmitter has not made a connection to a
FDAP and is in discovery (searching for a
connection to a FDAP). Transmitter will
automatically enter a power saving mode if it
cannot make a connection and will retry later. Wait for connection. If Transmitter does not
make a connection within five minutes, see
UNJOINED in this table.
RXADVERT The transmitter has received an
advertisement message for the ISA network Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
FIND MAC The transmitter is attempting to find the MAC
of the nearest FDAP Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
WAIT MAC The transmitter is waiting for the FDAP to
respond with its MAC address Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SENDSMJR The transmitter is sending a Join Request to
the Security Manange Network Object Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SMJRSENT The transmitter has sent a Join Request to
the Security Manange Network Object and is
awaiting a response Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SENDSMCR The transmitter is sending a Control Request
to the Security Manager Network Object Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.
SMCRSENT The transmitter has sent a ControlRequest to
the Security Manager Network Object and is
awaiting a response Wait for connection. If the transmitter does
not make a connection within five minutes,
see UNJOINED in this table.