Honeywell SmartLine, Руководство пользователя

Страница: 42 / 130

3. Installation
3.10. Rotate display
28 SmartLine Wireless User's Manual Revision 2
CAUTION
Take precautions against electrostatic discharge to prevent damaging the
display/sensor module.
Display adjustment
Step Action
1
Honeywell recommends that the transmitter be removed from service and moved to a
clean area before servicing.
2
Loosen the M3 locking set screw on the display end-cap. See item 1 in
Figure 3-15
.
Unscrew and remove the end cap.
3
Loosen the two captive screws on the display/sensor module. See items 2 in
Figure
3-15
.
4
Rotate the display 90 degrees in either direction so the screws line up with the
threaded holes. Do not rotate more than 90 degrees or you could damage the wires
behind the display.
5
There are two connectors on the back of the display/sensor module, J4 and J5, either
of which can be used to connect to the meter body cable. If required, move the meter
body cable to the other position.
6
Re-
attach the display’s two captive screws. Tighten to 0,4 – 0,6 Nm (3.5 – 5.3 lb-in.).
7
Replace end cap and tighten M3 locking screw.
Figure 3-15: Display rotation