Honeywell SmartLine RM60, Руководство пользователя

Страница: 68 / 128

6
OPERATION
68
SMARTLINE® RM60 (FMCW)
www.honeywell.com/ps 34-VF-25-31 iss.4 GLO December 15 US
6.4.7 How to make a filter to remove radar signal interference
If the device measures level in a silo that contains obstructions (ladder, supports etc.), these
objects can cause radar signal interference (parasitic signals). You can use the empty spectrum
function (menu item A.1.3) in the Quick Setup menu to make a filter to remove radar signal
interference.
• Get access to the Main Menu
Main Menu Main Menu
Main Menu of the supervisor mode.
i For more data, refer to How to get access to the supervisor mode on page 47.
• Go to Main Menu > Quick Setup > Setup Mode > Empty Spectrum Main Menu > Quick Setup > Setup Mode > Empty Spectrum Main Menu > Quick Setup > Setup Mode > Empty Spectrum Main Menu > Quick Setup > Setup Mode > Empty Spectrum.
• Is the tank completely full? Select Yes Yes Yes Yes or No No No No and then push [
^
^ ^
^
].
i If you select Yes Yes Yes Yes, the device will not do the empty spectrum scan. Empty the tank and repeat
the procedure.
• Are all the moving parts switched on? Select Yes Yes Yes Yes or No No No No and then push [
^ ^ ^ ^
].
• Is your tank partially filled or completely empty? Select Partially filled Partially filled Partially filled Partially filled or Empty Empty Empty Empty and then push
[
^ ^ ^ ^
].
• Do you want to use the average value or the maximum value? Select Average Average Average Average or Maximum Maximum Maximum Maximum and
then push [
^ ^ ^ ^
].
i Use the maximum for tanks that have moving parts. Use the average value for tanks that do
not have moving parts. The device will do an empty spectrum scan and then display the
results on the signal screen.
• Push [
^ ^ ^ ^
]. Do you want to save the spectrum. Select Yes
Yes Yes
Yes or No
No No
No and then push [
^ ^ ^ ^
].
INFORMATION!
We recommend that you do an empty spectrum scan when the silo is empty and all the moving
parts are in operation..
Figure 6-7: How to make a filter to remove radar signal interference
1 Empty silo before the device uses the empty spectrum scan (with a graph of reflections shown)
2 Partially filled silo before the device uses the empty spectrum scan (with a graph of reflections shown)
3 Partially filled silo after the device uses the empty spectrum scan (with a graph of reflections shown)
4 Support beam location
5 Silo bottom signal
6 Support beam signals (interference signals) before the device does the empty spectrum scan
7 Bad quality (mixed) signals of the solid and the support beam before the device does the empty spectrum scan
8 Reflected signal if the device uses the data from the empty spectrum scan. The device only uses the reflection on the
surface of the solid to measure distance.