Honeywell Minitrend QX Скачать руководство пользователя страница 169

Страница: 169 / 324

43-TV-25-30 Iss.6 GLO Aug 07 UK

163

**any increase is measured from the level when the recorder is first powered up.

Analogue Out Status

(Main Menu > Status > Diagnostics > Hardware > Analogue Out))

Not available for the

eZtrend QXe

•

Channel

- Displays the Slot position, eg. B, E or F, the Analogue Output number and

the system channel position. This will show a tick if this channel is enabled.

•

TX Pen

- Displays which pen is transmitting the signal

•

Range

- Displays the Output range set. A tick here will indicate this is over-range.

•

Output

- Displays the current Analogue Output reading for this channel.

Back

to return to the previous screen or select

Print

to print the screen.

Alarm/Digital IO Status

(Main Menu > Status > Diagnostics > Digital IO)

•

Channel

- Displays the Slot position, eg. G, H or I, the Digital IO number and the system

channel position. This will show a tick if this channel is enabled. Fixed refers to the com-
mon relay output on the power board (24V relay)

•

Input/Output/Pulse

- Displays what activity is on this channel, Input, Output or Pulse

Input.

•

Alarm

- Displays the Pen number and the Alarm number that activates the digital output

when the alarm is active. The Alarm has to be set to Relay out.

•

Status -

Displays the current state of the digital input on this channel or pulsed if Pulse

Out is selected. The relay is displayed as open or closed.

•

Counters

- Displays the counter number when active.

•

Duration

- Displays the Output Pulse duration set.

Back

to return to the previous screen or select

Print

to print the screen.

Table 4.12 : Thermocouple Active Burnout Status

Label

Descriptions

Disabled

Active burnout disabled

Normal

Active burnout enabled, input ok

Degraded

Thermocouple degraded (difference measurement: 10

to 99

increase**)

Failing

Thermocouple Failing (difference measurement: 100

to 200

increase**)

Failing

Thermocouple Failing (absolute measurement: over 230

increase**)

Almost Failed

Thermocouple Almost Failed (difference measurement: over 200

, not failed)

Almost Failed

Thermocouple Almost Failed (absolute measurement: 330

to 2k

)

Open Circuit

Thermocouple Failed, No data on passive channel,
Thermocouple Failed, but no error on passive thermocouple channel
Thermocouple Failed, also failed status on passive channel

Short Circuit

Possible thermocouple wiring short circuit detected (significant reduction in

)

Содержание Minitrend QX





































































































































































































































































































































Результаты поиска

Содержание Minitrend QX

Отзывы:

Похожие инструкции для Minitrend QX

Бренды по названию

Популярные бренды

Honeywell Minitrend QX, Руководство пользователя

Результаты поиска

Содержание Minitrend QX

Отзывы:

Похожие инструкции для Minitrend QX

Бренды по названию

Популярные бренды