manualshive.com logo in svg

Honeywell Minitrend QX, Руководство пользователя

Honeywell Minitrend QX - мощный регистратор данных с широкими мониторинговыми функциями. Получите подробное руководство по эксплуатации бесплатно на manualshive.com. Управляйте процессом с легкостью, скачав руководство пользователя для Minitrend QX сегодня.

Поделиться
Скачать
background image

264

43-TV-25-30  Iss.6   GLO  Aug 07  UK

Reference Temperature:   22°C                           

Reference Sample Rate:   2Hz (500msec)

Reference Humidity:    65% RH +/-15%          

Long term stability:    0.2%/year

* Does not includes reference junction calibration of ±1.0 º C using the standard “ice bath” method of calibration. Factory accuracy can be im-
proved by performing a field calibration. Also does not include any error on the sensor.

** Tolerance for these input types includes that of the external shunt resistors (0.1% tolerance)

*** Reference Accuracy can be improved to +/- 0.4ºC/0.7ºF using the single point compensation calibration.

# not available on the 

QXe. 

Including all Field Cal values.

PT100 

α

 

= 0.00385

-328 to 1562

-200 to 850

1.1

0.6

     0.01%/ °C

PT200 

α

 

= 0.00385

-328 to 1562

-200 to 850

1.1

0.6

     0.01%/ °C

PT500 

α

 

= 0.00385

-328 to 1562

-200 to 850

1.1

0.6

     0.01%/ °C

PT1000 

α

 

= 0.00385

-328 to 1562

-200 to 850

1.1

0.6

     0.01%/ °C

100 ohm Nickel

-76 to 356

-60 to 180

0.9

0.5

     0.01%/ °C

120 ohm Nickel

-112 to 500

-80 to 260

0.5

0.3

     0.01%/ °C

Cu10#

-328 to 500

-200 to 260

5.5***

3***

     0.01%/ °C

Cu53#

32 to 302

0 to 150

0.5

0.3

     0.01%/ °C

Specification                                                 Options

Pulse Input (optional)

(not available on the 

QXe

)

4 isolated inputs per board, frequency – 1Hz to 25kHz, updated once per sec. Input: Low < 1V, High >4V 
to <50V or Volt free input: Low = short circuit, High = open circuit.

Alarm Outputs (optional)

Programmable alarm set points (6 per pen) can be configured to activate up to 16 outputs for the 

QX

 and 

48 outputs for the 

SX

. Update rate: 200 ms for all alarms. Number/Type:

    •  4 or 8 relay contacts SPDT, 3A 240VAC, 3A 24VAC/DC, 0.2A 240VDC (non-inductive, internally 

suppressed)

    •  8 I/O or 16 I/O -  SPNO 1A 24VDC (non-inductive, internally suppressed). 

16 I/O not available for 

the 

QXe

Activation: Fully programmable internal alarm levels. Assignable to any relay or discrete output.

Analogue Outputs 

 

(Re-transmission Outputs)
(optional)

(not available for the 

QXe)

2 or 4 re-transmission outputs available for the 

QX

 Recorder and 2, 4, 6 or 8 re-transmission outputs avail-

able for the 

SX

 Recorder; a pen drives each output. Analog inputs, totalised values or any mathematical 

result can be re-transmitted.
Update Rate: 250 msec all channels         Accuracy: ±0.1% 0-500

Ω

 load, +/-0.25% 500

Ω 

1K

Ω

 load

Type: 0 to 20 / 4 to 20 mA                         Maximum Load Resistance: 1000 Ohms
Resolution: 0.002%                                   Isolation: 300VAC

Digital Input/Output 
(optional)

8 I/O or 16 I/O: all channels may be selected freely as either digital inputs or outputs. The Digital I/O card 
also has 4 channels that can be set as pulse inputs (channels 1 to 4). The operating frequency for pulse 
inputs on the Digital I/O card is 1kHz max. Input: Low < 1V, High >4.5V to <10V DC (9V to 20V p-p AC) or 
Volt free input: Low = short circuit, High = open circuit. 16 I/O not available for the 

QXe

4 relay outputs: all four channels are relay outputs only.
8 relays/ 2 DI card: two outputs can be configured for use as digital inputs: A digital input is provided by a 
volt free contact between the normally open (NO) and the common (C) terminals of an output relay. If the 
2 Digital inputs are used only 6 relay outputs are available. Closed <500 ohms, Open >300 kohms.

Transmitter Power (optional)

QX

 has 200mA @ 24VDC ± 3VDC. 

SX

 has 1 Amp @ 24VDC ± 3VDC.

QXe

 is available with 130mA @ 24VDC TXP as an option on the Comms card.

Agency Approval (optional)

CSA (Optional) CSA22.2-No.1010.1-2004 Certificate Number 211230. UL (Optional) ANSI/UL61010-1-
2004 File # 201698. FM Class 1 Division 2 (optional). FM not available for the 

QXe

Vutronik Connection 
(optional) QX Recorder only

Optional rear cover with 50-pin connector for direct connection to the recorder. TDC2000/3000 system 
using Vutronik Trend Recorder, 24VDC instrument power only.

Extended Security System 
(ESS) (optional)

Provides full support for 21 CFR Part 11. Includes features for entry of unique User ID’s and associated 
passwords, timeout on inactivity (1 to 10 min.), password expiration (1 to 365 days), up to 50 users, pass-
word re-entry lock out for incorrect entry of password more than 3 times, no re-use of passwords (pro-
grammable 4 to 12 times), traceability by user name

Miscellaneous

Optional customer ID Tagging (3 lines of up to 22 characters each line)

Содержание Minitrend QX





































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Minitrend QX

Keithley 580 Operator'S Manual preview
580
Бренд: Keithley Страницы: 73
Macherey-Nagel NANOCOLOR Advance Operating Instruction preview
NANOCOLOR Advance
Бренд: Macherey-Nagel Страницы: 45
Nady Audio ASM-2 User Manual preview
ASM-2
Бренд: Nady Audio Страницы: 2
​​​​​​​​​​​​​Teledyne Hastings Instruments 2002 Instruction Manual preview
2002
Бренд: ​​​​​​​​​​​​​Teledyne Hastings Instruments Страницы: 54
Blue-White FLEXFLO M4 Series Operating Manual preview
FLEXFLO M4 Series
Бренд: Blue-White Страницы: 64
GREISINGER G 1690 Quick Reference Manual preview
G 1690
Бренд: GREISINGER Страницы: 20
IFM AS-i CompactModule M8 Operating Instructions preview
AS-i CompactModule M8
Бренд: IFM Страницы: 4
THE ELECTRON MACHINE CORPORATION DSA E-Scan Operating And Service Manual preview
DSA E-Scan
Бренд: THE ELECTRON MACHINE CORPORATION Страницы: 32
TE Connectivity 549 AC Installation And Operating Instructions preview
549 AC
Бренд: TE Connectivity Страницы: 3
Leica Rangemaster CRF 1000 Instructions Manual preview
Rangemaster CRF 1000
Бренд: Leica Страницы: 118
SloanLED 601146 Installation Manual preview
601146
Бренд: SloanLED Страницы: 3
KEYBOARDPARTNER HX3 Drawbar Expander Version 5 Manual preview
HX3 Drawbar Expander Version 5
Бренд: KEYBOARDPARTNER Страницы: 11
Novus NVR-7308P8-H2 User Manual preview
NVR-7308P8-H2
Бренд: Novus Страницы: 52
Rockler GRP41241 Instructions preview
GRP41241
Бренд: Rockler Страницы: 4
Laserworld Rainbow RTI-Nano Series Manual preview
Rainbow RTI-Nano Series
Бренд: Laserworld Страницы: 25
Oceanic Datamask Quick Start Manual preview
Datamask
Бренд: Oceanic Страницы: 64
AEMC CA811 User Manual preview
CA811
Бренд: AEMC Страницы: 16
Solight 1T06 User Manual preview
1T06
Бренд: Solight Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды