manualshive.com logo in svg

Honeywell Minitrend QX, Руководство пользователя

Honeywell Minitrend QX - мощный регистратор данных с широкими мониторинговыми функциями. Получите подробное руководство по эксплуатации бесплатно на manualshive.com. Управляйте процессом с легкостью, скачав руководство пользователя для Minitrend QX сегодня.

Поделиться
Скачать
background image

212

43-TV-25-30  Iss.6   GLO  Aug 07  UK

Software Installation

The Comms server is only available with the 

TrendServer

 software. The comms server will 

auto install with the 

TrendServer

 software. 

Ensure the same communications information is entered into the hardware and the software 
in order for the communications link to work.e.g. Device name and ID., IP address of the 
device etc.

Install 

TrendServer

 from the

 

TrendManager Pro Suite

 folder and the comms server 

and database servers install automatically.

Before installing the software on to your PC, it is recommended to close down all other ap-
plications, including any programs that automatically load during the start up procedure. 

It is not recommended to load multiple installations on the same PC.

Load the CD into the drive and wait for the autorun sequence to start. If autorun does not 
commence, follow these instructions:

•   go to ‘My Computer’

•   select CD ROM drive

•   select Launch.exe

Follow the instructions on the screen

During installation you will be asked to select or confirm the following:

•   Which language variant (where applicable)

•   Destination folder for the software:

A destination folder and file path will be designated, but this can be changed if required by 
using the browse button. 

Select which version of the application software to install.

This will be dependant on which version has been purchased. 

TrendViewer, TrendManag-

er Pro, 

or

 TrendServer Pro. 

Select to install

Enter the code and organisation as supplied with each particular version of software. The code can be 
found inside the CD case. No code or organisation is required with

 TrendViewer.

NB:

 This is an alpha/numeric code and must be entered exactly in upper case. Codes from 

other 

Honeywell 

software will not work, each code is unique to the software supplied.

The 

TrendManager Suite 

may find it necessary to automatically upgrade certain applica-

tions within your PC to complete installation.

The setup will require a re-boot (re-start your computer) to complete installation

Upgrades

There are three software packages available:

 

TrendViewer

,

 

TrendManager Pro Suite

and 

TrendServer

. If your software upgrade is for the same package the software will au-

tomatically over-write the previous version. Local database information will not be affected 
and all devices data and setups are retained. Any other remote database servers will have 
to be added manually. 

If you have purchased a different package to what is already installed, the new software will 
detect this and only make available the same package. To install a different package, first 
un-install the previous version. There is no need to save databases or data, these will not 
be lost when un-installing the previous version. Devices and data held on a local database 
are retained for use with the new package as long as it is installed into the same directory.

Содержание Minitrend QX





































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Minitrend QX

La Crosse Technology WS-7048U Instructional Manual preview
WS-7048U
Бренд: La Crosse Technology Страницы: 8
Make Noise PHONOGENE Owner'S Manual preview
PHONOGENE
Бренд: Make Noise Страницы: 15
Major tech MT785 Instruction Manual preview
MT785
Бренд: Major tech Страницы: 40
National Instruments NI 9421 Getting Started Manual preview
NI 9421
Бренд: National Instruments Страницы: 18
Sensia CamCor CC001 Hardware User Manual preview
CamCor CC001
Бренд: Sensia Страницы: 139
York Elite 1600 ARC Operating Instructions preview
Elite 1600 ARC
Бренд: York Страницы: 2
Autometers Systems A-400 Series Programming And Installation Brochure preview
A-400 Series
Бренд: Autometers Systems Страницы: 16
ISKRAEMECO MT174 Manual preview
MT174
Бренд: ISKRAEMECO Страницы: 12
Ravaglioli RAVTD1760WS Series Service Manual preview
RAVTD1760WS Series
Бренд: Ravaglioli Страницы: 24
Chroma 19032-P Quick Start Manual preview
19032-P
Бренд: Chroma Страницы: 63
Klein Tools Ranger TDR VDV501-090 Instruction Manual preview
Ranger TDR VDV501-090
Бренд: Klein Tools Страницы: 44
PRONIVO PNTL45 Instruction Manual preview
PNTL45
Бренд: PRONIVO Страницы: 40
socomec COUNTIS E43 Instruction Manual preview
COUNTIS E43
Бренд: socomec Страницы: 34
Axio MET AX-T2200 Quick Start Manual preview
AX-T2200
Бренд: Axio MET Страницы: 5
CTC Union PRO VPR100 Series Product Manual preview
PRO VPR100 Series
Бренд: CTC Union Страницы: 10
PCB Piezotronics 354B33 Installation And Operating Manual preview
354B33
Бренд: PCB Piezotronics Страницы: 15
Sercel GRC ESP Series Field Installation Manual preview
GRC ESP Series
Бренд: Sercel Страницы: 63
M & I Instruments DT-86 Instruction Manual preview
DT-86
Бренд: M & I Instruments Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды