manualshive.com logo in svg

Honeywell Minitrend QX, Руководство пользователя

Honeywell Minitrend QX - мощный регистратор данных с широкими мониторинговыми функциями. Получите подробное руководство по эксплуатации бесплатно на manualshive.com. Управляйте процессом с легкостью, скачав руководство пользователя для Minitrend QX сегодня.

Поделиться
Скачать
background image

260

43-TV-25-30  Iss.6   GLO  Aug 07  UK

Data Storage

Removable Media:

 Compact Flash card supports up to 4.0 Giga bytes. (Compact Flash is not avail-

able as an option for the 

QXe

)

Local Mass Storage Options:

 USB memory key - no size restriction but must be formatted (FAT, 

FAT16, TFAT FAT32). USB hard drive - up to 120Gb.

Internal Data Buffer QX and SX Recorder:

 Non-volatile. 70MB (16 million acquisition values) 

upwards to 1850MB (up to 400 million points)

Internal Data Buffer QXe Recorder:

 Non-volatile. 70MB (16 million acquisition values) upwards to 

400MB (up to 90 million points)

Setup and screens: 

Stored internally on non-volatile memory 

Manual Saving:

 Data saving by inserting Compact Flash card or USB memory stick

Data Saving Period:

 Related to log rate, number of pens, totals and alarms. Each pen is capable of 

its own independent storage rate. 

 

QX

 and 

SX

 Recorder:

 

20ms to 60h, 

 

QXe

 Recorder: 100mS to 60h.

Data Format: 

Honeywell binary encoded format 

Recycling Mode: 

Internal memory has FIFO (First In First Out) capability where the newest data 

over-writes the oldest data.

Power Requirements

QX Recorder
Voltage (VRMS):

 100VAC to 250VAC (auto select). Frequency: 50/60Hz

Power Consumption: 

<40W. 

24V Optional instrument power:

 20 to 55VDC/20 to 30VAC. Power Consumption: < 40 watts

SX Recorder
Voltage (VRMS): 

100VAC to 250VAC (auto select). Frequency: 50/60Hz

Power Consumption: 

<60W. 

24V Optional instrument power: 

20 to 55VDC/20 to 30VAC. Power Consumption: < 60 watts

QXe Recorder
Voltage (VRMS):

 100VAC to 250VAC (auto select). Frequency: 50/60Hz

Power Consumption: 

<40W. 

24V Optional instrument power 

20 to 30VDC/20 to 25VAC. Power Consumption: < 40 watts

Common Relay Output (SPNC)

NC common alarm relay: Two contacts, normally open when the recorder is powered (no active 
alarms). Rating 24V, 1 Amp. (Not available for the 

QXe

)

Battery

Battery backed up for clock, replaceable Lithium battery Type 6032, 3.0V – 10 years life (Recorder 
powered), 

 

4 years life, typical (Recorder unpowered).

Password Protection

Multiple Administrator control of password setup and management with four levels of password 
protection for – Engineer, Supervisor, Technician, and Operator. Up to 50 different users are avail-
able. Password protection restricts user entry to the recorder set up and specific screens. 
Engineer – Highest access to all levels, Supervisor, Technician and Operator.
Supervisor – 2nd highest level including Technician and Operator access
Technician – 3rd level including Operator access
Operator – 4th and lowest level of access.

Languages

English UK & US, French, German, Italian, Spanish, Brazilian, Polish, Hungarian, Slovakian, 
Czech, Turkish, Romanian, Russian, Greek, Portuguese and Bulgarian.

Temperature Units

°C, °F, °K

Recorder Identification

Status bar: Alternately displays Recorder ID and Recorder Screen Name. Displays Time and Date.

Clock

Accuracy: ±29ppm (±1 minute/month) @ 25°C.
Summer/Winter manual or automatic time adjustment or via communications. SNTP Client and/or 
Server included for synchronising over Ethernet.

Alarm Set Points

6 per pen integral “soft” alarm set points easily set by user to announce selected out of limit condi-
tions; user can select if an alarm triggers a change in the screen background colour. Alarm triggers 
can be set for Hi, Lo, Deviation (latched or unlatched) for alarm acknowledgement.
Alarm Damping – 1 sec to 24 Hours; Hysteresis - +/- 100% of pen scale
Common relay output: 1A 24V, can be activated on any alarm.  (Not available for the 

QXe)

 

Specification                                            Design Attributes

Содержание Minitrend QX





































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Minitrend QX

Hach Surface Scatter 7 sc Instruction Sheet preview
Surface Scatter 7 sc
Бренд: Hach Страницы: 6
Hach sensION+ DO6 Manual preview
sensION+ DO6
Бренд: Hach Страницы: 118
Hach sensION+ EC5 User Manual preview
sensION+ EC5
Бренд: Hach Страницы: 388
Hach Orbisphere 51 Series User Manual preview
Orbisphere 51 Series
Бренд: Hach Страницы: 118
Hach ORBISPHERE 3650 Atex User Manual preview
ORBISPHERE 3650 Atex
Бренд: Hach Страницы: 51
Hach sensION+ EC71 Manual preview
sensION+ EC71
Бренд: Hach Страницы: 72
Hach POLYMETRON 8362 User Manual preview
POLYMETRON 8362
Бренд: Hach Страницы: 78
HACH LANGE Pocket Colorimeter II Basic User Manual preview
Pocket Colorimeter II
Бренд: HACH LANGE Страницы: 146
Hach Sigma 950 Instrument Manual preview
Sigma 950
Бренд: Hach Страницы: 146
Hach 2200 PCX User Manual preview
2200 PCX
Бренд: Hach Страницы: 36
Hach PHOSPHAX indoor sc User Manual preview
PHOSPHAX indoor sc
Бренд: Hach Страницы: 104
Hach Lange ORBISPHERE 3100 Basic User Manual preview
Lange ORBISPHERE 3100
Бренд: Hach Страницы: 384
Hach 5500sc SiO2 Installation Manual preview
5500sc SiO2
Бренд: Hach Страницы: 172
Velleman DCM120 User Manual preview
DCM120
Бренд: Velleman Страницы: 96
Yamaha Clavinova CVP-601 Reference Manual preview
Clavinova CVP-601
Бренд: Yamaha Страницы: 98
Yamaha Electone CSY-1 Manual preview
Electone CSY-1
Бренд: Yamaha Страницы: 28
Cecomp F20B Instruction Manual preview
F20B
Бренд: Cecomp Страницы: 4
Dennerle Duomat Evolution DeLuxe Instructions For Use Manual preview
Duomat Evolution DeLuxe
Бренд: Dennerle Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды