Honeywell MAXPRO MPIP2000U Series, Инструкция по установке и настройке, Страница: 7 / 77

Honeywell MAXPRO Intrusion MPIP2000U/3000U Series Installation and Setup Guide
800-23044 Rev. A draft_11 7
5.4.8 LED Indicators 76
5.5 MPI Relay Module MPIEOP4 76
5.5.1 About the MPI Relay Module 76
5.5.2 Features 76
5.5.3 Mounting 76
5.5.4 Summary of Connections 78
5.5.5 Example Functions 79
5.5.6 Programming 80
5.5.7 LED Indicators 80
5.6 MPI Zone Expander MPIEIO84U 81
5.6.1 About the MPI Zone Expander 81
5.6.2 Features 81
5.6.3 Mounting 81
5.6.4 Summary of Connections 83
5.6.5 Wiring the Zones 84
5.6.6 Wiring the Trigger Outputs 84
5.6.7 Programming 85
5.6.8 LED Indicators 85
5.7 MPI Remote Power Supply MPIPSU35 86
5.7.1 About the MPI Remote Power Supply 86
5.7.2 Features 86
5.7.3 Monitoring/Reporting Options 87
5.7.4 Mounting 88
5.7.5 Summary of Connections 90
5.7.6 IB2 Bus Connection 93
5.7.7 Wiring Outputs (Triggers) 93
5.7.8 Programming 94
5.7.9 IB2 Bus LED Indicators 95
5.7.10 Maintenance 95
5.8 Cabinet Mounting with Control Panel or Remote Power Supply 96
6 Installing V-Plex Devices 101
6.1 About V-Plex Devices 101
6.2 V-Plex Connections 102
6.2.1 Supervision 102
6.2.2 V-Plex Loop Short 102
6.2.3 Limitations of V-Plex Cable Runs 103
6.2.4 Load 105
7 Powering the System 106
7.1 Wiring the AC Power Supply in the Cabinet 106
7.1.1 Using the Pre-installed Plug in the Cabinet 107
7.1.2 Using Conduit 108
7.2 Powering the Main Board 109
7.3 Installing Backup Batteries 110
7.3.1 Maximum Current Draw 111
7.3.2 Determining the Control Panel's Load 111