7
ENGLISH
Mode Selection
Depending on which mode you select, one of the following symbols will show in the
display:
COOL Mode
If the set temperature on the remote control is lower than the actual room tem-
perature, the compressor runs at COOL mode and the air conditioner will deliver
cool air.
When room temperature is lower than the set temperature on the remote control,
the compressor stops and the fan is running only.
The room temperature can be set between the range of 16°C to 30°C.
HEAT Mode
If the set temperature on the remote control is higher than the actual room tem-
perature, the compressor runs at HEAT Mode and the air conditioner will deliver
warm air.
If the room temperature is higher than the set temperature on the remote control,
the compressor and the outdoor fan stop and the indoor fan is running only.
The room temperature can be set between the range of 16°C to 30°C.
DRY Mode
If the room temperature is /- 2°C of the set temperature on the remote con-
trol, the air conditioner operates in DRY Mode only. If the room temperature rises
outside of this range, the unit will change to the COOL Mode until the room tem-
perature is within the range of +/- 2°C again. The room temperature can be set
between the range of 16°C to 30°C.
AUTO Mode
In AUTO Mode the air conditioner maintains the room temperature between 20°C
and 25°C.
If the room temperature is higher than 25°C, the COOL Mode starts.
If the room temperature is lower than 20°C, the HEAT Mode starts.
According to the room temperature the air conditioner automatically selects the
,
,
.operation mode, for best results.
1. Plug in, press ON/OFF key (5) then air conditioner is turned on.
2. Press MODE key (9), to set
,
,
,
or
operation mode.
3. Press SWING key (11) to start or stop oscillating louvers.
4. Press FAN key (12) to set fan speed.
5. Press TEMP key (10) to choose required room temperature.
COOL mode
DRY mode
FAN mode
HEAT mode
AUTO
AUTO
HW-QUICK12E_GB_OM.qxd 4/2/07 12:04 PM Page 7
